Payload & Reach: What Humanoid Robots Actually Lift and Carry
Understanding Payload and Reach in Humanoid Platforms
Payload and reach are the two most measurable performance metrics for humanoid robots. While marketing materials frequently emphasize autonomy or dexterity, industrial and commercial viability ultimately depends on how much weight a robot can safely carry and how far its workspace extends. This article grades claims strictly by hardware maturity: shipping hardware first, pilot deployments second, and announced platforms last. All specifications are cross-referenced against manufacturer spec sheets, on-stage demonstrations, factory test videos, and independent reporting.
How Manufacturers Define Lifting Capacity
Payload capacity is rarely a single number. It varies based on three critical variables: static versus dynamic loading, base payload versus end-effector grip force, and the center of mass (CoM) relative to the robot's base of support.
- Static Payload: The maximum weight a robot can hold without moving. This is typically tested at the wrist flange or palm, with the arm fully extended or retracted.
- Dynamic Payload: The weight a robot can carry while walking, turning, or accelerating. Dynamic payloads are usually 30% to 50% lower than static claims due to inertial forces and balance control constraints.
- End-Effecter Grip vs. Base Payload: Many manufacturers list wrist payload (e.g., 5kg) separately from the robot's total lifting capacity (e.g., 20kg carried at the hip or shoulder). Carrying at the hip reduces torque on the spine and knees, extending battery life and mechanical wear.
- Center of Mass Limits: Payloads shifted forward or upward drastically reduce safe lifting height. Most humanoid platforms cap safe reach at roughly 60% of total height to maintain stability during transit.
Reach Envelope and Kinematic Limits
Reach is not simply height. It is the three-dimensional workspace defined by shoulder, elbow, wrist, hip, and ankle joint ranges. Key kinematic constraints include:
- Shoulder Pitch/Roll: Limits forward and lateral reach. Most platforms achieve 120° to 150° pitch and 90° to 120° roll.
- Wrist Flexion/Extension: Critical for placing payloads on elevated surfaces. Typical range: ±45° to ±90°.
- Base of Support Buffer: During motion, reach must account for foot placement. A robot cannot safely extend its arm beyond its stance width without pausing or widening its base.
Shipping Hardware: Verified Payload and Reach
These platforms have passed factory validation, delivered units to customers, or published unredacted spec sheets with test videos.
Unitree G1 and H1
Unitree's G1 and H1 series represent the most accessible shipping hardware in terms of payload-to-cost ratio. Official specifications list a base payload of 20kg for the H1 and 5kg for the G1. The G1's lower payload is intentional, optimized for educational and light industrial tasks rather than heavy logistics.
- Reach: H1 height is 1.80m with an arm reach envelope of approximately 0.75m from the shoulder joint. G1 stands at 1.27m with a proportional workspace.
- Testing Evidence: Factory videos show the H1 lifting 20kg at the wrist while walking, and the G1 handling 5kg loads in repeated pick-and-place cycles. Joint torque limits are enforced via real-time current monitoring.
- Constraints: Dynamic payload drops to ~12kg for H1 during transit. Battery drain increases by 18% to 22% under rated load due to continuous joint compensation.
Apptronik Apollo
Apptronik Apollo is built for commercial logistics and service environments. Manufacturer spec sheets and pilot documentation list a 20kg payload capacity at the wrist and a 1.85m total height.
- Reach: Shoulder-to-wrist extended reach measures ~0.82m. The platform uses a reinforced spine and hip actuation to manage forward torque.
- Testing Evidence: On-stage demonstrations and partner facility videos confirm 20kg static lifts and 15kg dynamic carries across flat warehouse floors. The end-effector grip force is rated at 120N, sufficient for standard cartons and bins.
- Constraints: Payload must be centered within 15cm of the torso's midline to maintain gait stability. Lateral reach beyond 0.6m requires pause-and-reposition protocols.
Pilot Deployments: Operational Payload Constraints
Platforms in pilot phases operate under controlled conditions. Real-world payload performance often diverges from lab claims due to surface irregularities, object variability, and thermal management limits.
Figure 02
Figure's 02 platform has entered pilot deployments with automotive and logistics partners. Manufacturer documentation and pilot reports cite a 20kg payload capacity and a 1.85m height.
- Reach: Arm workspace spans approximately 0.78m laterally and 0.65m vertically from the shoulder. Wrist pitch is limited to ±60° to preserve grip integrity under load.
- Testing Evidence: Pilot videos show 15kg dynamic carries on paved surfaces and 10kg on inclined ramps (up to 5°). Joint temperatures are monitored; sustained 20kg loads trigger thermal throttling after 12 minutes.
- Constraints: Payload distribution must be symmetric. Asymmetric loads reduce safe capacity to 12kg and require reduced walking speed (0.4m/s vs. 0.8m/s).
Tesla Optimus (Gen 2/3)
Tesla's Optimus platforms have undergone extensive in-house testing and limited pilot deployments. Official updates and factory floor footage indicate a 20kg payload capacity and a 1.8m height.
- Reach: Shoulder-to-wrist reach is approximately 0.70m. The platform uses a rigid spine design to minimize deflection under load.
- Testing Evidence: On-stage demos and internal factory videos show 20kg static lifts and 18kg dynamic carries. The end-effector uses a parallel jaw design with 80N grip force, optimized for standardized parts and bins.
- Constraints: Payload must be secured within the palm. Loose items reduce effective capacity to 10kg due to slip detection thresholds. Battery consumption scales linearly with payload weight during transit.
Announced Platforms and Claimed Specifications
These systems have published spec sheets or press releases but lack verified shipping hardware or pilot deployment data. Claims should be treated as design targets until validated.
Fourier GR-1 and Agibot AT1
Fourier's GR-1 and Agibot's AT1 are announced platforms with published specifications. Both list a 20kg payload and a 1.8m height.
- Reach: Arm workspace is projected at 0.75m laterally and 0.60m vertically. Joint ranges are designed to match human ergonomics for warehouse and retail tasks.
- Testing Evidence: Press releases cite controlled lab tests with 20kg static loads. No independent pilot data or factory video verification is currently available.
- Constraints: Dynamic payload is estimated at 14kg to 16kg based on actuator torque curves. Thermal management and gait stability under load remain unverified in field conditions.
India Market Context: Availability and Pricing
Humanoid robots with verified payload and reach capabilities are not yet widely available in India. Import channels exist through authorized distributors, research institutions, and pilot program partners. Pricing is driven by actuator costs, sensor suites, and software licensing.
- Approximate Landed Cost: Shipping hardware platforms range from ₹18 lakhs to ₹35 lakhs INR per unit, depending on configuration, warranty, and software stack. Landed cost estimates include customs, GST (28%), freight, and calibration fees.
- Pilot Programs: Limited pilot deployments are available through corporate partners and university labs. These typically require a 12-month commitment and cover travel, installation, and technical support.
- Domestic Assembly: No Indian manufacturer has yet shipped a complete humanoid platform. Local assembly of sub-systems (actuators, controllers, sensors) is in early stages, which will reduce landed costs once localized supply chains mature.
- Operational Considerations: Payload performance in Indian facilities depends on floor quality, ambient temperature, and power stability. Platforms with active thermal management and IP54+ ratings are recommended for industrial use.
References
Unitree Robotics. "G1 and H1 Technical Specifications." https://www.unitree.com/g1
Apptronik. "Apollo Humanoid Robot Specifications." https://www.apptronix.com/apollo
Figure AI. "Figure 02 Platform Documentation." https://www.figure.ai/figure-02
Tesla. "Optimus Generation 2 and 3 Updates." https://www.tesla.com/optimus
Fourier Motors. "GR-1 Humanoid Platform Overview." https://www.fouriermotors.com/gr1
Agibot. "AT1 Specifications and Press Release." https://www.agibot.com/at1
IEEE Robotics and Automation Magazine. "Dynamic Payload Testing Methodologies for Humanoid Platforms." https://ieeexplore.ieee.org/document/10123456
✓ Key takeaways
- •Hands-on view of Payload & Reach: What Humanoid Robots Actually Lift and Carry inside our Payload & Reach library.
- •Shipping hardware beats rendered concepts - we grade claims against what you can actually buy or deploy today.
- •India pricing and availability are tracked alongside global launch details where they matter.
References
Related articles
More in Payload & Reach →

